Table of Contents
Advertisement
System board and components
14.6.3.3 Concluding steps
"Reassembling" on page 68
Ê
"Connecting the power cord" on page 81
Ê
"Switching on the server" on page 82
Ê
14.6.4 Replacing the microSD card
Upgrade and Repair Unit
(URU)
Tools: a pair of side-cutting pliers
14.6.4.1 Preliminary steps
"Locating the defective server" on page 49
Ê
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
14.6.4.2 Replacing the microSD card
Ê Remove the Dual microSD 64GB Enterprise, see section
Dual microSD 64GB Enterprise" on page
Ê Remove the defective microSD card from the Dual microSD 64GB
Enterprise. Proceed as described in the following:
Ê To eject the defective microSD card, gently push it in and then let go (see
figure
323 on page
Ê Pull the microSD card straight out of its slot.
V
CAUTION!
The microSD card contains customer information. After replacing the
microSD card, hand the defective card over to the customer. If the
customer requests disposal of the defective microSD card, proceed
as follows:
448
447).
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Removing the
444.
TX2550 M4
Advertisement
Table of Contents
