Replacing The Dual Microsd 64Gb Enterprise - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê

14.6.3.2 Replacing the Dual microSD 64GB Enterprise

Ê Remove the defective Dual microSD 64GB Enterprise, see section
"Removing the Dual microSD 64GB Enterprise" on page
Ê Remove both microSD cards from the defective Dual microSD 64GB
Enterprise. Proceed as described in the following:
Figure 323: Removing the microSD card
Ê To eject the microSD card, gently push it in and then let go (1).
Ê Pull the microSD card straight out of its slot (2).
Ê Install both microSD cards on the new Dual microSD 64GB Enterprise.
Proceed as described in the following:
Figure 324: Installing the microSD card
Ê With the label facing up, insert the microSD card into the microSD slot on
the controller (1) until it locks in place (2).
Ê Install the new Dual microSD 64GB Enterprise, see section
Dual microSD 64GB Enterprise" on page
TX2550 M4 Upgrade and Maintenance Manual
System board and components
444.
439.
"Installing the
447