M.2 Ssd - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX2550 M4:
Table of Contents

Advertisement

System board and components
14.5

M.2 SSD

The system board offers two M.2 slots (Key M) with support for 42 mm, 60 mm,
80 mm and 110 mm long M.2 SSDs. With the M.2 SSD an internal SSD is
offered. This SSD can be configured as a boot device or data storage device.
14.5.1 Installing an M.2 SSD
Upgrade and Repair Unit
(URU)
Tools:
– Phillips PH1 / (+) No. 1 screw driver
– Hexagon screw driver
14.5.1.1 Preliminary steps
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
"Removing the system air duct" on page 67
Ê
"Removing the PCI air duct" on page 86
Ê
Ê If applicable,
"Removing the riser module" on page 84
"Removing the crossbar" on page 88
Ê
Ê If applicable,
"Removing an expansion card" on page 318
432
Upgrade and Maintenance Manual
Hardware: 5 minutes
TX2550 M4

Advertisement

Table of Contents
loading

Table of Contents