Table of Contents
Advertisement
9.3
Handling SFP+ transceiver modules
A network adapter is equipped with one or two SFP+ (small form-factor
pluggable) transceiver modules.
9.3.1
Installing SFP+ transceiver modules
Upgrade and Repair Unit
(URU)
Tools: tool-less
Preparing the SFP+ transceiver module
Figure 202: Removing the protective cap
Ê Remove the SFP+ transceiver module from its protective packaging.
Ê Remove the protective cap from the new/additional SFP+ transceiver
module.
V
CAUTION!
– Always keep the protective caps attached to the SFP+ transceiver
modules and fiber-optic cable connectors until you are ready to
make a connection.
– Keep the protective cap for future use.
TX2550 M4
Expansion cards and backup units
Upgrade and Maintenance Manual
Hardware: 5 minutes
297
Advertisement
Table of Contents
