Replacing The Defective Cmos Battery - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

System board and components

14.2.1.2 Replacing the defective CMOS battery

1
Figure 297: Replacing the CMOS battery
Ê Press the locking spring into direction of the arrow (1), so that the CMOS
battery jumps out of its socket.
Ê Remove the CMOS battery (2).
V
CAUTION!
Sharp tools such as screw drivers might damage system board
components in case of slipping.
If the CMOS battery cannot be ejected without the help of a tool, it is
recommended to use a tooth pick.
Ê Insert a new CMOS battery of the same type into the socket (3) and (4).
14.2.1.3 Concluding steps
Ê Dispose of the CMOS battery in accordance with local regulations
concerning special waste.
"Reassembling" on page 68
Ê
"Connecting the power cord" on page 81
Ê
"Switching on the server" on page 82
Ê
"Verifying the system time settings" on page 123
Ê
416
2
Upgrade and Maintenance Manual
4
3
TX2550 M4