Table of Contents
Advertisement
Hard disk drive (HDD) / solid state drive (SSD)
7.5.4.3
Installing the new HDD/SSD backplane
Figure 163: Installing the HDD/SSD backplane
Ê At a slight angle, fit the HDD/SSD backplane into the six recesses in the
HDD extension box (1).
Ê Fold down the HDD/SSD backplane (2).
Ê Fasten the HDD/SSD backplane with four screws (see figure 161).
Ê Install the 8x 2.5-inch HDD extension box, see section
inch HDD/SSD extension box" on page
7.5.4.4
Concluding steps
Ê Install the fan bridge, see section
"Installing the system air duct" on page 68
Ê
"Reassembling" on page 68
Ê
Ê Install all HDDs into their original slots in the HDD extension box, see section
"Installing 2.5-inch HDD/SSD modules" on page
"Connecting the power cord" on page 81
Ê
"Switching on the server" on page 82
Ê
250
"Handling fan bridges" on page 90
Upgrade and Maintenance Manual
"Installing the 8x 2.5-
242.
179.
TX2550 M4
Advertisement
Table of Contents
