Table of Contents
Advertisement
5.2
Completing the maintenance task
5.2.1
Updating or recovering the BIOS and iRMC
I
For Japan:
Follow the instructions provided separately.
After replacing the system board, memory or a CPU, it is essential to upgrade
the BIOS and iRMC to the latest version. The latest BIOS and iRMC versions
are available from the Fujitsu support internet pages at:
http://ts.fujitsu.com/support/
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
I
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from BIOS updates.
5.2.1.1
Updating or recovering the BIOS
BIOS flash procedure
Ê Perform the BIOS flash procedure as described in the "BIOS Setup Utility"
reference manual of your server.
BIOS recovery procedure
Ê Perform the BIOS recovery procedure as described in the "BIOS Setup
Utility" reference manual of your server.
5.2.1.2
Updating or recovering the iRMC
iRMC flash procedure
Ê Prepare a USB stick including the bootable iRMC firmware update image.
Ê Connect the USB stick containing the iRMC firmware to a USB port.
Ê Restart the server. The system will start the POST process.
Ê During POST, press [F12] and select the connected USB stick as boot
device. The system will detect the USB stick.
TX2550 M4
Upgrade and Maintenance Manual
Basic software procedures
111
Advertisement
Table of Contents
