Removing The Serial Interface - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

15.1.2 Removing the serial interface

Upgrade and Repair Unit
(URU)
Tools: hexagon screw driver 5 mm
15.1.2.1 Preliminary steps
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
15.1.2.2 Removing the serial interface
Ê Remove the two bolts (see figure 329) and take out the serial interface.
I
The rectangular break-out remains open.
Ê Disconnect the serial interface cable from the system board connector
"SERIAL" (see figure 328).
15.1.2.3 Concluding steps
"Reassembling" on page 68
Ê
"Connecting the power cord" on page 81
Ê
"Switching on the server" on page 82
Ê
Bestellnummer
Bearbeitungsstand
Serial interface
Hardware: 5 minutes
463