Irmc Microsd Card - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

14.4

iRMC microSD card

I
The iRMC microSD card is necessary for using the embedded Lifecycle
Management (eLCM) functionality of the iRMC. It requires a valid eLCM
license key, which is always purchased together with the iRMC microSD
card and activated through the iRMC web interface.
For more information, see the "ServerView embedded Lifecycle
Management (eLCM)" user guide.
14.4.1 Installing the iRMC microSD card
Upgrade and Repair Unit
(URU)
Tools: tool-less
14.4.1.1 Preliminary steps
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
Ê If applicable, remove the riser module, see section
module" on page
14.4.1.2 Installing the iRMC microSD card
Figure 304: iRMC microSD card
TX2550 M4
84.
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
"Removing the riser
427