Concluding Steps - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
Figure 172: Installing the HDD backplane (B)
Ê Place the bracket (see arrow) and fasten it with one screw (see circle).
Ê Fasten the HDD backplane with two screws (see figure 168).
Ê Install the 4x 3.5-inch HDD extension box, see section
inch HDD extension box" on page
7.5.7.4

Concluding steps

Ê Install the fan bridge, see section
"Installing the system air duct" on page 68
Ê
"Reassembling" on page 68
Ê
Ê Install all HDDs into their original slots in the HDD extension box, see section
"Installing 3.5-inch HDD modules" on page
"Connecting the power cord" on page 81
Ê
"Switching on the server" on page 82
Ê
260
251.
"Handling fan bridges" on page 90
Upgrade and Maintenance Manual
"Installing the 4x 3.5-
218.
TX2550 M4