Removing The Ultraslim Odd - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Accessible drives

12.5.2 Removing the ultraslim ODD

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
12.5.2.1 Preliminary steps
"Removing backup and optical disk media" on page 108
Ê
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
I
The front cover only needs to be removed in order to remove or install
accessible drive dummy covers. If the HDD extension box will be
reinstalled after removing the ultraslim ODD, the front cover can
remain installed.
"Removing the system air duct" on page 67
Ê
Ê If applicable, "Removing the riser module" on page 84
Ê If applicable, remove the expansion card, see section
expansion card" on page
Ê Remove the fan bridge, see section
Ê If applicable, "Removing the 4x 3.5-inch HDD extension box" on page 255
12.5.2.2 Removing the 4x 3.5-inch HDD extension box
Ê Remove the 4x 3.5-inch HDD extension box, see section
3.5-inch HDD extension box" on page
12.5.2.3 Removing the ultraslim ODD from the extension box
Ê Disconnect the power cable and the SATA cable from the ultraslim ODD.
394
318.
"Handling fan bridges" on page
255.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing an
"Removing the 4x
90.
TX2550 M4