Connecting The Cable To A Non-Hot-Plug Hdd/Ssd; Concluding Steps - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state drive (SSD)
Figure 183: Installing the non-hot-plug cage (B)
Ê Fasten the non-hot-plug cage with one screw (see circle).
7.7.1.6

Connecting the cable to a non-hot-plug HDD/SSD

Figure 184: Connecting the cable to the non-hot-plug HDDs/SSDs
Ê Connect the cable(s) to the non-hot-plug HDDs/SSDs (1, 2).
I
For the cable plan see chapter
7.7.1.7

Concluding steps

"Reassembling" on page 68
Ê
"Connecting the power cord" on page 81
Ê
272
"Appendix B" on page
Upgrade and Maintenance Manual
517.
TX2550 M4