Preliminary Steps - Fujitsu PRIMERGY TX2550 M4 Upgrade And Maintenance Manual

Processor (CPU)

11.2.1 Preliminary steps

"Suspending BitLocker functionality" on page 105
Ê
"Shutting down the server" on page 52
Ê
"Disconnecting the power cord" on page 53
Ê
"Getting access to the component" on page 54
Ê
"Removing the system air duct" on page 67
Ê
11.2.2 Removing the socket cover
Figure 256: Removing the socket cover
Ê Remove the socket cover and save it for future use.
11.2.3 Installing the CPU and heat sink
V
CAUTION when replacing a system board
Ê Use a magnifying glass (recommended) to inspect the socket spring
contacts for damages from different angles. Do not use the spare
system board if any irregularities are visible. Possible damages:
– Contact spring is bent backwards upon itself
– Contact spring tip position is shifted or out of alignment
358
Upgrade and Maintenance Manual TX2550 M4