Gambro Cobe Spectra Essentials Manual page 46

Introduction
Prime mode
position
indicator
Flow control
handcrank
Figure 2-11: Return Flow Controller in prime position
2-20
Return flow
guide
Figure 2-12: Return Flow Controller symbols
Bag mounting plate : Supports the Single-Needle bag. Located in the
top section of the Return Flow Controller. The Single-Needle bag lies on
this plate.
Bag locator pin: Secures the Single-Needle bag. Located on the bag
mounting plate. The locator hole in the Single-Needle bag fits over the
bag locator pin.
Bag alignment block : Helps align the Single-Needle bag. Insert the
Single-Needle bag from this side of the Return Flow Controller, and
place the two Single-Needle bag lines on either side of the center brass
triangle.
®
COBE Spectra™ Apheresis System • Essentials Guide