Table 14-1: Donor/patient data entry limits (continued)
Parameter
Desired TPE/RBCX fluid balance (%)
Volume of replacement fluid to be used for TPE (mL)
Volume of plasma plus AC to remove for TPE (mL)
RBCX replacement fluid Hct (%)
RBCX end Hct (%)
Desired fraction of RBCs remaining (%)
RBC replacement volume (mL)
Access pressure low limit (mm Hg)
Return pressure high limit (mm Hg)
BMP bag volume (mL)
BMP Hct (%)
* An accurate donor Hct is critical for performing a leukoreduced platelet collection procedure. Obtaining an actual Hct from the donor on the day of donation and entering
that Hct during donor data entry is recommended.
+ The operator cannot enter an inlet pump flow rate below 10 mL/min, but under certain circumstances the Spectra system can set a lower rate.