Gambro Cobe Spectra Essentials Manual page 42

Introduction
Filler: Holds the separation channel. For more information, see "Fillers"
on page 2-17.
Filler locking pin: Locks the filler onto the centrifuge. Located on the
centrifuge opposite the filler latching pin and filler latch.
Filler latching pin: Locks the filler latch. Together with the filter locking
pin, locks the filler onto the centrifuge.
Filler latch: Locks the filler onto the centrifuge.
Centrifuge collar holder: Uses hinged cover to hold one of the
nonrotating ends of the channel's multi-lumen tubing. Located on the
end of the filler latch.
Centrifuge loading port: Enables channel loading.
Centrifuge arm: Holds the channel's multi-lumen tubing in place as the
centrifuge is spinning.
Lower bearing holder (not shown): Secures the channel's multi-lumen
tubing on the centrifuge arm.
Upper bearing holder: Secures the channel's multi-lumen tubing on the
centrifuge arm.
Upper collar holder: Attaches the upper end of the channel's multi-
lumen tubing to the horizontal arm above the centrifuge.
Strobe: Helps monitor separation in the channel. Visible through the
centrifuge cover view port.
Fluid leak detector: Detects a blood or fluid leak from the channel when
the centrifuge is spinning.
Gear shroud: Protects you from pinch points in the gear train.
2-16
Centrifuge
collar
Filler
holder
locking
pin
Filler
latching
pin
Figure 2-5: Top view of centrifuge
®
COBE Spectra™ Apheresis System • Essentials Guide
Filler
latch