Event Log Messages - HP ProCurve 6200yl Multicast And Routing Manual

PIM-SM (Sparse Mode)

Event Log Messages

Message
< multicast-addr >/< mask > Inconsistent
address and mask.
<pkt-type> pkt, src IP < ip-addr > vid < vid-
# > (not a nbr)
Bad <parameter-name> in <pkt-type> pkt
from IP < ip-addr >
BSM send to < ip-addr > failed
Candidate BSR functionality disabled
<pkt-type>
Candidate RP functionality disabled
C-RP advertisement send to < ip-addr >
failed
Enabled as Candidate BSR using
address: < ip-addr >
Enabled as Candidate RP using
address: < ip-addr >
Failed alloc of HW <flow> for flow
< src-ip-addr >, < multicast-addr >
Failed to initialize <pkt-type> as a
call back routine
Failed to alloc a <pkt-type> pkt (vid
< vid-# >)
I/F configured with IP < ip-addr > on
vid < vid-# >
I/F removal with IP < ip-addr > on vid
< vid-# >
4-66
Event Log Messages
Meaning
The mask entered for the specified multicast address does
not specify sufficient bits to include the nonzero bits in the
mask.
A PIM packet was received that doesn't have a neighbor.
The PIM packet was dropped due to a bad parameter in the
packet from the IP address shown.
A BSM (Bootstrap Message) send failed. The IP address
shown is the BSM destination address.
Candidate BSR functionality has been disabled.
Candidate RP functionality has been disabled.
A C-RP advertisement send failed. The IP address shown is
the destination address of the message.
Candidate BSR functionality has been enabled at the
indicated IP address.
Candidate RP functionality has been enabled at the
indicated IP address.
Hardware resources are consumed and software routing is
being done for the flow.
The IP address manager PIM callback routine failed to
initialize.
Allocation of a packet buffer failed message.
The IP address on the PIM interface has changed to the
indicated address.
The PIM interface has been removed due to IP address
removal or change of the indicated IP address.