Debug; Delete - HP FlexFabric 7900 Series Command Reference Manual

debug

Use debug to enable or disable FTP client debugging.
Syntax
debug
Default
FTP client debugging is disabled.
Views
FTP client view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
When FTP client debugging is enabled, executing this command disables FTP client debugging.
When FTP client debugging is disabled, executing this command enables FTP client debugging.
Examples
# Enable and then disable FTP client debugging.
ftp> debug
Debugging on (debug=1).
ftp> debug
Debugging off (debug=0).

delete

Use delete to permanently delete a file on the FTP server.
Syntax
delete remotefile
Views
FTP client view
Predefined user roles
network-admin
mdc-admin
Parameters
remotefile: Specifies the name of a file on the FTP server.
Usage guidelines
You can perform this operation only after you log in to the FTP server.
To perform this operation, you must have delete permission on the FTP server.
Examples
# Delete file b.txt.
ftp> delete b.txt
250 File deleted from remote host.
86