Vhms Data Download; Vhms Initialization Form - Komatsu 830E-AC Shop Manual

9. At the Verification screen:
a. Ensure that all information is correct.
b. Click on [Apply].
c. At the confirmation screen, select [Yes].
d. Select [OK].
e. Select [OK] to close the program.
10. Start the VHMS Setting Tool program.
a. Select "VHMS Setting", then click [Next].
b. Select "Setup only", then click [Next].
c. Select "Payload Meter", then click [Next].
d. Set Start Time to "0".
e. Set Interval to "1".
f. Click [Apply].
g. Click [Exit].
11. Perform a manual snapshot.
a. With the engine running, press the GE data
store switch and hold it for three seconds.
The white data store in progress LED should
illuminate.
b. While the manual snapshot is in process,
operate the machine if possible. The
snapshot lasts for 7 1/2 minutes.
12. After the "data store in progress" LED has been
off for one minute, turn the key switch OFF. Wait
three minutes before turning the key switch ON.
D14-4

VHMS DATA DOWNLOAD

A manual snapshot must be performed before
downloading any data. For new machines, this
should have been performed during the VHMS
Initialization Check List procedure.
1. Perform a VHMS download. For more detailed
information on how to perform a download, refer
to VHMS Download in Section D, 24VDC
Electrics in the appropriate shop manual.
2. Start the VHMS Technical Analysis Tool Box
program. Use the view feature to look at the
data and verify the settings are correct, the
SMR is correct, the manual snapshot is
recorded in fault history, and the engine ON/
OFF is stored in machine history file.
3. E-mail the downloaded data files to Komatsu
America Service Systems Support Team at
ServicePrograms@KomatsuNA.com. Refer to
Location of Download Files for more detailed
instructions on locating the files.

VHMS INITIALIZATION FORM

This form must be completed and submitted at:
• New machine delivery
• VHMS controller replacement
• OrbComm controller replacement
• Engine or alternator replacement
Customer Information
• Enter the customer information. All fields are
required.
Distributor Information
• Enter the distributor information. All fields are
required.
• All distributors are required to have one contact
person who is responsible for coordinating
VHMS, Payload, Komtrax and Fleet Manager
activities for all branches.
VHMS - Forms 01/06 D14003