Alarm 16 - Memory Write Failure
Alarm 17 - Memory Read Failure
These alarms indicate that the payload meter has encountered a problem internally with its memory. It is recom-
mended that power to the payload meter be removed for 1 minute. First turn the key switch OFF. Wait 30 seconds,
then turn the battery disconnect OFF. Wait 1 minute before restoring power.
In cases where re-powering the payload meter does not restore normal operation, it may necessary to reprogram
the payload meter. All current data in memory will be lost. This will effectively restart the payload meter.
• See "Troubleshooting Abnormal Displays at Power-Up" for more information.
M20-48
Payload Meter III
02/05 M20008