Table of Contents
Advertisement
FIGURE 7-22.
20. Position the shaft as shown. Insert a phillips-
head screwdriver into pitot tubes (3) to loosen
and remove them from the shaft. Rotate the
pitot tube until the sealant holding it tight is
broken loose. Then grip the pitot tube with a
pair of pliers and gently tap on the pliers to
remove the pitot tubes from the hole in the
shaft.
FIGURE 7-23.
21. Remove both seal rings (17).
C07001
22. Remove external snap ring (16).
23. Remove internal snap ring (15).
Fan Clutch
FIGURE 7-24.
FIGURE 7-25.
C7-13
Advertisement
Chapters
Table of Contents
