Table of Contents
Advertisement
4. Remove six hex jam nuts (11, Figure 10-54)
using an 11 mm socket. Remove the phase
leads from the terminals. If necessary, remove
flat washers (12, Figure 10-55) and insulators
(13).
FIGURE 10-54.
11. Hex Jam Nuts
FIGURE 10-55.
12. Flat Washers
D10003 07/06
20. Drive End Housing
13. Insulators
Battery Charging Alternator
5. Mark the location of the six phase leads for
proper reassembly. Place a different identifica-
tion mark on both the housing and each phase
lead terminal.
FIGURE 10-56.
6. Remove and discard nine lock flange nuts (14)
using a 9 mm socket.
FIGURE 10-57.
14. Lock Flange Nuts
20. Drive End Housing
D10-47
Advertisement
Chapters
Table of Contents
