Adjustment
1. Block wheels to prevent truck movement.
2. Start engine and operate at low idle speed.
3. Move the directional control lever to the NEU-
TRAL position. This will release the parking
brake.
4. Fully apply the service brakes. The service
brake piston adjusters will adjust automatically
when pressure is applied to the service brake.
J06025 10/06
FIGURE 6-3. BLEEDER PLUG LOCATION
1. Bleeder Plug
4. Bleeder Plug
2. Bleeder Plug
5. Bleeder Plug
3. Bleeder Plug
6. Bleeder Plug
Armature Speed Rear Disc Brakes
5. Parking brake adjustment occurs automatically
when the parking brake is released and the ser-
vice brake is applied.
6. Move directional control lever to PARK.
7. Turn key switch to the OFF position.
7. Bleeder Plug
J6-7