Table of Contents
Advertisement
Seat Removal
1. Remove cap screws (10, Figure 3-5) and hard-
ware that secures the seat base to the riser.
Remove cap screws (11) that secures tether to
floor.
2. Remove seat assembly from cab to clean work
area for disassembly.
N03025
Seat Installation
1. Mount seat assembly to seat riser. Install cap
screws (10, Figure 3-5), lockwashers, flatwash-
ers and nuts. Tighten cap screws to standard
torque.
2. Fasten tether straps to floor with cap screws
(11), flatwashers and lockwashers. Tighten cap
screws to standard torque
Cab Components
N3-7
Advertisement
Chapters
Table of Contents
