Komatsu 830E-AC Shop Manual page 379

Machine Information
• Enter machine information. All fields are required.
• VHMS and Orbcomm controller part numbers
and serial numbers can be found on a sticker on
each controller. Verify that this matches the
information displayed in the VHMS Setting Tool
and download.
VHMS Setting Tool Information
• Enter the setting date. This should be the date
when the first data download was taken and the
VHMS Setting Tool program was first used.
• Enter the setting time. This should be the time
shown in the first data download. Verify that it is
the correct time.
• Enter the Greenwich Mean Time (GMT) for the
location the machine will be working.
• Check whether the location where the machine
will be working uses Daylight Savings Time
(DST).
• Enter the service meter reading (SMR) at time of
the first download.
• Enter the GCC Code. This setting tells the
Orbcomm unit which
communicate with. Select the correct location
from the drop down menu list.
• Enter the Orbcomm activation date. In the
Orbcomm Activation Date field, enter a date at
least two weeks ahead of today's date
Reason for Form Submittal
Check the reason for submitting the VHMS
Initialization Form.
D14003 01/06
satellite network to
VHMS - Forms D14-5