Komatsu 830E-AC Shop Manual page 543

OIL AND NITROGEN SPECIFICATIONS CHART
Ambient Temperature
Range
-30°F & above
(-34.5°C & above)
-55°F & above
(-48.5°C & above)
NOTE: VJ3911 and VJ5925 oils are not compatible and must not be mixed in a suspension.VJ3911 and VJ5925
oils are supplied in 5 gallon (19 Liter) cans.
FRICTION MODIFIER
Part Number
AK3761
(5 Gallon container of
100% Friction Modifier)
Nitrogen gas used in HYDRAIR
Suspension Cylinders must meet or
exceed CGA specification G-10.1 for
Type 1, Grade F Nitrogen Gas
H04025
®
HYDRAIR II OIL SPECIFICATIONS
Part No.
VJ3911 Mobil 424
(need to add Mobil D.T.E. 15
6% of Texaco TDH Oil
AK3761) AMOCO ULTIMATE Motor Oil
AK4063 Suspension Oil (premixed with
6% Friction Modifier)
AK4064
VJ5925 Emery 2811, SG-CD,
(need to add
6% of Mobil Delvac I, 5W-30
AK3761)
AK4065 Suspension Oil (premixed with
6% Friction Modifier)
AK4066
FRICTION MODIFIER Mixing Instructions
(94% Suspension oil, 6% Friction Modifier)
Suspension Oil
1 gallon of suspension oil
5 gallons of suspension oil
55 gallons of suspension oil
NITROGEN GAS (N
Property
®
II
Nitrogen
Water
Dew Point
Oxygen
FIGURE 4-5. SPECIFICATIONS CHART
Oiling and Charging Procedures
Approved Sources
Sunfleet TH Universal Tractor Fluid
Chevron Tractor Hydraulic Fluid-
Conoco Power Tran III Fluid
Petro Canada Duratran Fluid
5W-30 Shell Canada Donax TDL
Petro Canada Super Arctic Motor
5W-30
Conoco High Performance
Synthetic Motor Oil, 5W-30
Amount of Friction Modifier to add
)SPECIFICATIONS
2
-68°F (-55°C) Maximum
5 Gallon container
55 Gallon container
Oil, 0W-30
5 Gallon container
55 Gallon container
add 7.7 oz.
add 38.4 oz.
add 3.3 gal.
Value
99.9% Minimum
32 PPM Maximum
0.1% Maximum
H4-11