Komatsu 830E-AC Shop Manual page 856

NOTE: Some haul cycles may contain the Sensor
Input warning flag. This indicates that one of the four
pressure sensors or inclinometer was not functioning
properly during the haul cycle. Haul cycles with this
warning are displayed in red on the Payload
Summary window and are not included in the
summary statistics for reports or display.
Summary - one page report
A summary of the queried data can be printed onto 1
page. The cycle data is summarized onto one sheet.
Displayed is the speeds, cycle times, load statistics,
frame and tire data.
Detailed - multi-page report
The detail report starts with the summary report and
follows with pages of data for each haul cycle. The
detailed report prints date, time, payload, cycle times,
and cycle distances, speeds and the number of
swing loads.
M20-28 Payload Meter III 02/05 M20008