15. Remove pulley bushing (4).
FIGURE 10-66.
4. Pulley Bushing
NOTE: Use a pair of expandable pliers and gently
wiggle (move side-to-side) the pulley bushing out of
the housing.
FIGURE 10-67.
4. Pulley Bushing
D10-50
20. Drive End Housing
75. Expandable Pliers
Battery Charging Alternator
16. Remove spiral ring (5) from pulley bushing (4)
and discard.
FIGURE 10-68.
4. Bushing
17. Place drive end housing (20) into a hydraulic
press with the outer surface of the housing sup-
ported by the press table.
FIGURE 10-69.
20. Drive End Housing
5. Spiral Ring
77. Hydraulic Press
D10003 07/06