Precautions For Truck Operation - Komatsu 830E-AC Shop Manual

PRECAUTIONS FOR TRUCK OPERATION

Safety Is Thinking Ahead
Prevention is the best safety program. Prevent a
potential accident by knowing the employer's safety
requirements and all necessary job site regulations.
In addition, know the proper use and care of all the
safety equipment on the truck. Only qualified opera-
tors or technicians may attempt to operate or main-
tain a Komatsu machine.
Safe practices start before the operator gets to the
equipment!
Safety At The Worksite
• When walking to and from a truck, maintain a
safe distance from all machines even when the
operator is visible.
• Before starting the engine, thoroughly check the
area for any unusual conditions that could be
dangerous.
• Examine the road surface at the job site and
determine the best and safest method of
operation.
• Choose an area where the ground is as
horizontal and firm as possible before performing
the operation.
• If you need to operate on or near a public road,
protect pedestrians and cars by designating a
person for work site traffic duty or by installing
fences around the work site.
• The operator must personally check the work
position, the roads to be used, and existence of
obstacles before starting operations.
• Always determine the travel roads to be used at
the work site. Travel roads must be maintained in
order to ensure safe machine travel.
• If travel through wet areas is necessary, check
the depth and flow of water before crossing the
shallow parts. Never drive through water which
exceeds the permissible water depth.
A3-6
Fire Prevention
•
•
•
•
Preparing For Operation
•
•
•
Ventilation For Enclosed Areas
•
General Safety and Operating Instructions
Remove all wood chips,
leaves, paper and other
flammable items
accumulated in the engine
compartment, as they could
cause a fire.
Check fuel, lubrication, and hydraulic systems for
leaks. Repair any leaks. Clean any excess oil,
fuel or other flammable fluids, and dispose of
properly.
Ensure a fire extinguisher is present and in
proper working condition.
DO NOT operate the machine near open flames.
Always mount and dismount while facing the
truck. Never attempt to mount or dismount the
truck while it is in motion. Always use handrails
and ladders when mounting or dismounting the
truck.
Check the deck areas for debris, loose hardware,
and tools. Check for people and objects that
remain on or around the truck.
Become familiar with and use all protective
equipment devices on the truck and ensure that
these items (anti-skid material, grab bars, seat
belts, etc.) are securely in place.
If it is necessary to start the
engine in an enclosed area,
provide adequate ventilation.
Exhaust fumes from
engine can kill.
the
3/06 A03030