Komatsu 830E-AC Shop Manual page 869

Dump truck, serial numbers a30001-a30035

Hide thumbs Also See for 830E-AC:

Table of Contents

Calibration Problems

• Confirm that the truck is empty and clean.

• Confirm that the payload meter is in the proper haul state. The payload meter must be in the empty, or tare

zone states to begin calibration. This can be checked by using the real-time monitor mode of the Payload Data

Manager software.

• The payload meter can be reset to acknowledge the beginning of a new haul cycle by raising the body when

the truck is empty. This may be necessary after servicing the suspensions.

M20008 02/05

Payload Meter III

Chapters

Table of Contents