Komatsu 830E-AC Shop Manual page 338

d. Double-click the appropriate date folder to
drop down the check number folders.
e. Double-click the appropriate check number
folder to display its contents in the files win-
dow.
6. Some models will automatically create a send-
ing file during the download process. Others
need to have the sending file created at this
time. A sending file is just a compressed ver-
sion of all the other downloaded files. If there is
already a sending file in the Send File window,
you do not need to perform this step. If there is
not a sending file in the Send File window, click
the [Make Sending File] button.
NOTE: The compressed sending file will look similar
to this file name, and will always end with a ".K".
P_830E_-_A30761_1105208857.K
7. After selecting the correct file to send, click the
[Send (FTP)] button.
8. Click the [Yes] button to verify that you want to
upload the data to WebCARE.
D12-12
9. If the sending file was uploaded successfully,
the file will appear in the OK window. If the
sending file was not uploaded successfully, the
file will appear in the NG (No Good) window.
Make sure the laptop PC has an internet con-
nection.
10. Click the [OK] button, then the [Exit] button.
Close all other open windows.
6. VHMS INITIALIZATION FORMS
Complete the initialization check list and initialization
forms found in this section. Send the initialization
form to Komatsu.
Initialization is now complete.
VHMS SOFTWARE D12004