Komatsu 830E-AC Shop Manual page 331

INTERFACE MODULE REALTIME DATA
MONITOR SOFTWARE PROGRAM
The Interface Module Realtime Data Monitor Soft-
ware is used to display the data going into and out of
the interface module. The program is installed onto a
laptop PC.
Installation
1. Copy the file onto the laptop PC hard drive.
2. Double click on the file and follow the screen
prompts to install the software.
Using The Program
1. Start the Interface Module Realtime Monitor
program.
2. Click on the [Select Serial Port] menu item.
Select the correct communication port. It will
usually be Com1.
3. Click on the [Start/Stop] menu item and choose
[Start].
4. Logging?
5. Click on the [Units] menu to select the desired
units to display the information.
D12004
VHMS CONTROLLER
VHMS TOOL BOX
Installation
1. Insert the CD. The VHMS Technical Analysis
Tool Box software will begin installing automati-
cally.
2. Accept the recommended defaults and finish
installing VHMS Technical Analysis Tool Box.
3. Double-click on the new icon on the desktop,
VHMS Technical Analysis Tool Box.
4. Initialize the software by inserting the Set Up
Disk.
5. Enter the User Name. The User Name is user.
6. Enter the Password. The Password you entered
the first time will be your Password from then
forward, unless you change it.
7. VHMS Technical Analysis Tool Box is installed.
VHMS SETTING TOOL
Installation
1. Insert the CD. If the VHMS Technical Analysis
Tool Box software begins installing automati-
cally, select the [Cancel] button to stop the
installation process.
2. Open My Computer.
3. Right-click on the CD drive and select Open.
4. Open the Setting Tool folder.
5. Double-click on the Setup.exe file.
6. Accept the recommended defaults and finish
installing VHMS Setting Tool.
VHMS SOFTWARE D12-5