Komatsu 830E-AC Shop Manual page 28

Dump truck, serial numbers a30001-a30035
Hide thumbs Also See for 830E-AC:
Table of Contents

Advertisement

Precautions With The Battery
When
repairing
the
electrical
system
when
performing
welding,
remove
the
negative (-) terminal of
the battery to stop the
flow of current.
Handling High Pressure Hoses
DO NOT bend high-pressure hoses or hit them
with hard objects. DO NOT use any bent or
cracked piping, tubes or hoses. They may burst
during use.
Always repair any loose or broken hoses. Fuel
and/or oil leaks may result in a fire.
Precautions With High Pressure Oil
Always remember that work equipment circuits
are always under pressure.
DO
NOT
add
oil,
maintenance or inspections before completely
releasing the internal pressure.
Small, high pressure pin-hole leaks are extremely
dangerous. The jet stream of high-pressure oil
can pierce the skin and eyes. Always wear safety
glasses and thick gloves. Use a piece of
cardboard or a sheet of wood to check for oil
leakage.
If you are hit by a jet of high-pressure oil, consult
a doctor immediately for medical attention.
A3-14
or
drain
oil,
or
perform
General Safety and Operating Instructions
Maintenance Near High Temperatures And High
Pressures
Immediately after stopping the
truck, the engine coolant and
operating oils are at high
temperature and under high
pressure. In these conditions,
opening
the
system
replacing filters may result in burns or other
injury. Wait for the temperature to cool and
pressure to subside before performing the
inspection and/or maintenance as outlined in the
service manual.
Rotating Fan And Belts
Keep a safe distance from
rotating parts such as the
radiator fan and fan belts.
Serious
bodily
injury
result from direct or indirect
contact with rotating parts and flying objects.
Waste Materials
Never dump oil or other
harmful fluids into a sewer
system, rivers, etc.
Obey appropriate laws and
regulations when disposing
of harmful objects such as
oil, fuel, coolant, solvent,
filters, batteries, and others.
Always put fluids drained from your machine in
appropriate containers. Never drain fluids directly
onto the ground.
or
may
3/06 A03030

Advertisement

Table of Contents
loading

Table of Contents