Table of Contents
Advertisement
21. The Connection Menu will be displayed. Select
"Configure Payload Meter".
22. Confirm that the PLMIII software version
matches the latest available version. As of 09-
May-01 the EJ0575-1 software version will dis-
play as "01/28/01A". The latest version can be
found at http://www.kms-peoria.com/payload. If
the version does not match the latest indicated
on the internet, download the latest and update
the PLMIII software using the Flashburn soft-
ware. See Checkout Procedure Confirmation
for more information.
23. Using the Truck Configuration menu, set the fol-
lowing:
•
Set the time.
•
Set the Date to today's date.
•
Set the Gauge display units to Metric, Short Tons
or Long Tons according to the final destination of
the vehicle. If nothing has been specified, set to
Metric Tons.
•
Set the truck type to the proper truck model.
•
Press the "Save Changes" button to program the
change into the payload meter.
24. Setting the Frame Serial Number.
M20008 02/05
NOTE: The frame serial number is located on a plate
mounted to the truck frame. The plate is outboard on
the lower right rail facing the right front tire. It is very
important to enter the correct frame serial number.
This number is one of the key fields used within the
haul cycle database. The field will hold 20 alpha-
numeric characters.
•
On the Truck Configuration screen, enter the
frame serial number in the appropriate field.
•
Press the "Save Changes" button to program the
change into the payload meter.
25. Setting the Customer Unit Number.
NOTE: Most mining operations assign a number to
each piece of equipment for quick identification. This
number or name can be entered in the Customer
Unit Number field. It is very important to enter
customer unit number. This number is one of the key
fields used within the haul cycle database. The field
will hold 20 alpha-numeric characters. If no truck
number has been specified, enter the frame serial
number.
•
On the Truck Configuration screen, enter the
truck number in the appropriate field.
•
Press the "Save Changes" button to program the
change into the payload meter.
26. Setting the Komatsu Distributor.
NOTE: This field in the haul cycle record can hold the
name of the Komatsu distributor that helped install
the system. Komatsu also assigns a distributor
number to each distributor. This number is used on
all warranty claims. This Komatsu distributor number
can also be put into this field. This number is one of
the key fields used within the haul cycle database.
The field will hold 20 alpha-numeric characters. If the
distributor is not known, enter "UNKOWN".
•
On the Truck Configuration screen, enter the dis-
tributor name or number in the appropriate field.
•
Press the "Save Changes" button to program the
change into the payload meter.
Payload Meter III
M20-55
Advertisement
Chapters
Table of Contents
