Komatsu 830E-AC Shop Manual page 38

23. Move around the right front wheel; check that all
lugs/wedges are in place and tight.
24. Move in behind the front of the right front wheel,
check the hub and brakes for leaks and any
unusual condition. Check the hoist filters for
leaks. Inspect the steering cylinder for secure-
ness and for proper greasing. Inspect the
engine compartment for any leaks and unusual
conditions. Inspect the fan guard and belts.
Check for any rags or debris behind the radia-
tor.
25. Inspect the auto lube system. See Automatic
Lubrication System in Section P, for specific
details concerning the auto lube system.
26. Move around to the right front of the truck, drop
the air cleaner pans and empty. Inspect the bat-
tery box cover for damage and ensure it is in
place and secure.
27. As you move in front of the radiator, inspect for
any debris in the radiator and remove. Check
for any coolant leaks. Inspect headlights and
fog lights.
28. Ensure the ground level engine shutdown
switch is ON. Inspect the fire control actuator to
ensure the safety pin is in place and the plastic
tie that prevents accidental actuation is in place
and in good condition. Ensure the battery dis-
connect switches are ON. Always use grab rails
and the ladder when mounting or dismounting
the truck. Clean the ladder and hand rails of any
foreign material, such as ice, snow, oil or mud.
29. Use the stairs and handrails while climbing from
the first level to the cab deck.
Always mount and dismount ladders facing the
truck. Never attempt to mount or dismount while
the truck is in motion.
A3-24
If the engine has been running, allow the coolant
to cool before removing the fill cap or draining
the radiator. Serious burns may result if skin
comes in contact with hot coolant.
General Safety and Operating Instructions
30. When checking the coolant level in the radiator,
use the coolant level sight gauge. If it is neces-
sary to remove the radiator cap, relieve coolant
pressure by depressing the pressure relief but-
ton, and then slowly removing the radiator cap.
31. Inspect the covers over the retarding grids and
ensure they are secure. Inspect the main air
inlet to ensure it is clear. Ensure all cabinet door
latches are secure.
32. Move to the back of the cab. Open the doors to
the brake cabinet and inspect for leaks.
33. Clean the cab windows and mirrors. Clean out
the cab floor as necessary. Ensure steering
wheel, controls and pedals are free of any oil,
grease or mud.
34. Stow personal gear in the cab in a manner that
does not interfere with truck operation. Dirt or
trash buildup, specifically in the operator's cab,
must be cleaned. DO NOT carry tools or sup-
plies in the cab of the truck or on the decks.
35. Adjust the seat and the steering wheel for use.
36. Read and understand the description of all
operator controls. Become familiar with all con-
trol locations and functions before operating the
truck.
3/06 A03030