Komatsu 830E-AC Shop Manual page 329

To work with the Vehicle Health Monitoring System
(VHMS) system, several special tools and software
programs are required. Refer to Tables 1 and 2 for
detailed information on VHMS software and tools.
Refer to the following pages for detailed information
on how to perform certain procedures using VHMS
specific software.
NECESSARY SOFTWARE
Part Number
Version 3.04.03.01 VHMS Technical
Analysis Tool Box
Version 3.06.00.00 VHMS Setting Tool
1.1.0.0 Install.exe Interface Module
Realtime Data Moni-
tor Software Version
1.1.0.0 Install.exe
EJ3055-2.exe Flashburn Software
EM2126-0.exe 830E-AC
Application Code
1.4.7.39 PDM
EJ0575-5 PLM III
NECESSARY TOOLS
Part Number
Laptop PC
Serial cable
Adaptor
D12004
VHMS SOFTWARE
Table 1: VHMS Software
Name
To maintain VHMS system
To initialize VHMS system
Use to watch inputs and outputs in the inter-
face module
To install application code in interface module
Application code for interface module
Payload Meter III Data Manager
PLM III Controller Software to work with VHMS Komatsu Distributor
Table 2: VHMS Tools
Name
200 MHz or higher
64 MB RAM or more
Serial or USB Port
CD/DVD -Rom drive
Floppy Drive
Windows 95/98/2000/ME/XP
(RS232) Purchase locally
Male DB9 connector at one end
Female DB9 connector at other end
USB port to RS232 (serial) port adapter
(If laptop PC does not have an RS232 port,
this adaptor is required)
VHMS SOFTWARE
The data files, application code and flashburn soft-
ware are only required if the interface module is
being replaced. Replacement interface modules from
Komatsu do not have any software installed in them.
NOTE: Be aware that the software and data files are
updated periodically. Check with the local Komatsu
distributor for the latest software versions.
Description
Description
Source
Komatsu Distributor
Komatsu Distributor
Komatsu Distributor
Komatsu Distributor
Komatsu Distributor
Komatsu Distributor
Source
Purchased Locally
Purchased Locally
Purchased Locally
D12-3