Horiba Scientific FluoroMax-4 Operation Manual page 66

® ®
FluoroMax -4 & FluoroMax -4P with USB rev. D (30 Jul 2012)
4
Set up the excitation and emission wave-
length(s).
a
b
c
d
5
Enter the excitation and emission slit-width(s) in
the Slit Sets area.
6
Click the Run button
The experiment starts. FluorEssence™ prompts you to insert the sample, if you
chose to change the samples manually. The dataset is recorded and appears on
the screen.
7
Create the calibration curve.
Enter the appropriate excitation and emission wavelength set(s), one per
row, in the Wavelength Sets area.
To add a wavelength set, click the Insert row button.
To delete a wavelength set, select the rows, and click the Delete rows
button.
To clear all wavelength sets, click the Clear all button.
.
4-14
Data Acquisition