F4-3030 Temperature Bath - Horiba Scientific FluoroMax-4 Operation Manual

® ®
FluoroMax -4 & FluoroMax -4P with USB rev. D (30 Jul 2012)

F4-3030 Temperature Bath

For studies of samples whose properties are tem-
perature-dependent, use the F4-3030 Temperature
Bath. The controller circulates fluids externally,
with tubes leading to the sample chamber. The
temperature range is from –25°C to +80°C. Sensor
and all cables are included with the F4-3030 and
F4-3030-220. The Temperature Bath is available in
a 110 V (F-3030) and 220 V (F4-3030-220) ver-
sion.
Warning:
mation on the hazards of an ethylene-glycol–water mixture.
This instrument uses high-temperature fluids, which can cause se-
vere burns.
Refer to your Material Safety Data Sheet (MSDS) for infor-
12-29
Components & Accessories