Horiba Scientific FluoroMax-4 Operation Manual page 109

® ®
FluoroMax -4 & FluoroMax -4P with USB rev. D (30 Jul 2012)
8
Put the old lamp (in the top cover) in a safe
place.
9
Attach connections to the new lamp.
a
b
c
10
Insert the new xenon lamp.
a
b
c
d
e
11
Replace the safety cover and lamp-housing
cover.
12
Replace the three screws on the lamp-housing
cover.
13
Reconnect all cables (power, accessories, etc.)
to the FluoroMax
Attach the cathode
connection to the new
lamp, and secure the
connection with the
new lamp's
thumbscrew.
Attach the anode connection to the
new lamp, and secure the connection with the new lamp's thumbscrew.
Recheck that the connections are correct.
Insert the new lamp in the bottom
holder.
Press the lamp down into the holder to
compress the spring.
Tilt and raise the anode end of the
lamp into the top holder.
Place the lamp so that the nipple on
the glass envelope is opposite the
collection mirror.
Set the height adjustment, using the
1/8" Allen key. Try to return the new
lamp to the approximate position of
the old lamp.
®
-4.
Note:
Do not replace the FluoroMax
correctly adjusted.
Warning:
any portion of the
lamp except the metal
cathode and anode.
Cathode (+)
Anode (–)
®
-4 cover until the lamp is
6-7
Maintenance
Do not touch
Collection
mirror