Horiba Scientific FluoroMax-4 Operation Manual page 108

® ®
FluoroMax -4 & FluoroMax -4P with USB rev. D (30 Jul 2012)
b
c
d
e
f
g
h
7
Place the old lamp in the top protective cover
from the new lamp.
Press down against the spring action.
Notice how the nipple faces away
from the collection mirror (not visi-
ble here behind the hand).
Caution:
Improper connections to
the lamp severely affect lamp
performance and affect the pow-
er supply. Carefully note the an-
ode and cathode connections to
the lamp. The anode (+) is on
top; the cathode (–) is on the bot-
tom. The nipple on the lamp's
glass envelope marks the anode
(+) side.
Gently tilt the lamp
away from the top
post.
Lift the lamp out of
the lamp housing far
enough to remove
the anode and
cathode
connections.
Remove the
thumbscrew at the
anode end (top) of
the lamp, leaving
the post exposed.
Remove the anode cable.
Remove the thumbscrew at the cathode end (bottom) of the lamp,
leaving the post exposed.
Remove the cathode cable.
6-6
Maintenance