Experiment Menu Button - Horiba Scientific FluoroMax-4 Operation Manual

® ®
FluoroMax -4 & FluoroMax -4P with USB rev. D (30 Jul 2012)

Experiment Menu button

The Experiment Menu button chooses an overall type of experiment to run, such as an
emission scan, a phosphorimeter scan, a synchronous scan, etc., based on the instru-
ment and connected accessories, such as a temperature bath, MicroMax, etc. Only those
scans that can be run using the available hardware configuration are active; scans that
cannot be taken are grayed out.
Calibration scans for the FluoroMax
Excitation monochromator: Spectra/Excitation scan
Emission monochromator: Spectra/Emission scan
1
To choose an experiment type, click the Exper-
iment Menu button
The Fluorescence Main Experiment
Menu appears:
2
Choose an experiment
type.
The Experiment Type window appears.
3
Choose a subtype of ex-
periment, and click the
Next >> button.
The Experiment Setup window appears:
®
use default parameters:
Note:
Certain scan types are
not allowed with
®
FluoroMax , and
grayed out.
Note:
Some experiment types
(for example, Kinetics) do not
have subtypes, so no
ment Type
window appears.
:
the
are
Experi-
4-2
Data Acquisition