Disclaimer - Horiba Scientific FluoroMax-4 Operation Manual

® ®
FluoroMax -4 & FluoroMax -4P with USB rev. D (30 Jul 2012)

Disclaimer

By setting up or starting to use any HORIBA Instruments Incorporated product, you are
accepting the following terms:
You are responsible for understanding the information contained in this document. You
should not rely on this information as absolute or all-encompassing; there may be local
issues (in your environment) not addressed in this document that you may need to ad-
dress, and there may be issues or procedures discussed that may not apply to your situa-
tion.
If you do not follow the instructions or procedures contained in this document, you are
responsible for yourself and your actions and all resulting consequences. If you rely on
the information contained in this document, you are responsible for:
Adhering to safety procedures
Following all precautions
Referring to additional safety documentation, such as Material Safety Data Sheets
(MSDS), when advised
As a condition of purchase, you agree to use safe operating procedures in the use of all
products supplied by HORIBA Instruments Incorporated, including those specified in
the MSDS provided with any chemicals and all warning and cautionary notices, and to
use all safety devices and guards when operating equipment. You agree to indemnify
and hold HORIBA Instruments Incorporated harmless from any liability or obligation
arising from your use or misuse of any such products, including, without limitation, to
persons injured directly or indirectly in connection with your use or operation of the
products. The foregoing indemnification shall in no event be deemed to have expanded
HORIBA Instruments Incorporated's liability for the products.
HORIBA Instruments Incorporated products are not intended for any general cosmetic,
drug, food, or household application, but may be used for analytical measurements or
research in these fields. A condition of HORIBA Instruments Incorporated's ac-
ceptance of a purchase order is that only qualified individuals, trained and familiar with
procedures suitable for the products ordered, will handle them. Training and mainte-
nance procedures may be purchased from HORIBA Instruments Incorporated at an ad-
ditional cost. HORIBA Instruments Incorporated cannot be held responsible for actions
your employer or contractor may take without proper training.
Due to HORIBA Instruments Incorporated's efforts to continuously improve our prod-
ucts, all specifications, dimensions, internal workings, and operating procedures are
subject to change without notice. All specifications and measurements are approximate,
based on a standard configuration; results may vary with the application and environ-
ment. Any software manufactured by HORIBA Instruments Incorporated is also under
constant development and subject to change without notice.
Any warranties and remedies with respect to our products are limited to those provided
in writing as to a particular product. In no event shall HORIBA Instruments Incorpo-
0-3
Introduction