Fl4-1015 Injector Port - Horiba Scientific FluoroMax-4 Operation Manual

® ®
FluoroMax -4 & FluoroMax -4P with USB rev. D (30 Jul 2012)

FL4-1015 Injector Port

For the study of reaction kinetics, such as Ca
Port is ideal. This accessory allows additions of small volumes via a syringe or pipette
to the sample cell without removing the lid of the sample compartment. With the injec-
tor in place, a lock-tight seal is achieved, prevented both light and air from reaching the
sample.
The Injector Port will accommodate most pipettes and syringes, with an injection-hole
diameter of 0.125" (3.2 mm). A cap is included to cover the port when not in use.
2+
measurements, the FL4-1015 Injector
Caution:
Always read the Material Safety Data Sheet
(MSDS) to understand the hazards of handling your
sample.
12-24
Components & Accessories