Using Diagnostic Spectra - Horiba Scientific FluoroMax-4 Operation Manual

® ®
FluoroMax -4 & FluoroMax -4P with USB rev. D (30 Jul 2012)

Using diagnostic spectra

Often the spectrum reveals information regarding the hardware or software parameters
that should be adjusted. The following spectra occur with explanations about problems
leading to their appearance.
Note:
FluoroMax
system or sample problems, and may not reflect the performance of
your particular FluoroMax
Lamp scan
Running a lamp scan verifies system integrity and indicates whether the correct param-
eters for the best possible trace are being used. The following spectrum shows the trace
resulting from a lamp scan run with a known good lamp.
Not all spectra shown in this section were produced using the
®
-4. The spectra are presented to show different possible
®
-4
7-4
Troubleshooting