Horiba Scientific FluoroMax-4 Operation Manual page 198

® ®
FluoroMax -4 & FluoroMax -4P with USB rev. D (30 Jul 2012)
Use
1
Place your sample in a 10 mm × 10 mm cuvette
and insert a magnetic stirring bar.
The stirring bar is available from Bel-Art Products, Pequannock, NJ
2
Place a cuvette in each holder.
3
Allow the sample to reach the desired tempera-
ture.
4
Turn on the magnetic stirrer.
5
Select the appropriate speed.
The speed at which the sample should be mixed depends on the viscosity of the
sample.
6
Run your experiment as usual.
Note:
While the two-position model maintains the temperature of
both samples, only one sample is mixed at a time.
Note:
Selecting too high a speed may create a vortex, which
could affect the reproducibility of the measurement.
12-14
Components & Accessories