Sample Cells - Horiba Scientific FluoroMax-4 Operation Manual

® ®
FluoroMax -4 & FluoroMax -4P with USB rev. D (30 Jul 2012)

Sample cells

J1955 HPLC Flow Cell
With a sample capacity of 20 μL, this
non-fluorescing fused silica cell is ideal
for on-line monitoring of fluorescent
samples. The cell maintains high sensi-
tivity because it has a large aperture for
collecting the excitation light to the
sample and fluorescence emission from
the sample. The flat sides allow maxi-
mum throughput while keeping the
scattering of the incident radiation to a
minimum. The cell fits in a standard
cell holder.
F-3011 Micro Cell Adapter
This is the adapter to hold the F-3012 Micro Cell in the Sample Holder.
F-3012 Micro Cell
This non-fluorescing fused silica cylindrical cell holds 250 μL. A magnetic stirrer can-
not be used with this cell.
J1925 Quartz Cuvette
With a 4-mL volume, this cell measures 10 mm × 10 mm in
cross-section, and comes with a Teflon
volatile liquids.
J1920 Sample Cell
This 2-mL to 4-mL non-fluorescing fused silica cell, can accept a
magnetic stirrer, has a 10-mm path length, and includes a white
®
Teflon cap that prevents sample evaporation.
Caution:
Always read the Material Safety Data Sheet
(MSDS) to understand the hazards of handling your sam-
ple.
®
stopper to contain
12-4
Components & Accessories