Horiba Scientific FluoroMax-4 Operation Manual page 107

® ®
FluoroMax -4 & FluoroMax -4P with USB rev. D (30 Jul 2012)
e
5
Prepare the replacement lamp.
a
b
6
Remove the old xenon lamp.
a
Rotate the cover
backwards, and set it
to the side of the
instrument, so that
electrical connections
are not strained.
The lamp is held in
place by spring tension
and the height adjust-
ment on top of the
lamp. The anode and
cathode connections
are attached to the
lamp via thumbscrews
on top and bottom of the lamp.
Place the new xenon lamp (still in its protective cover) on top of the
excitation monochromator.
Remove the top half of the new lamp's protective cover.
Keep this top half handy for later.
While holding the
metal anode (top)
portion of the lamp,
loosen the height
adjustment above the
lamp with a 1/8" Allen
key, until the lamp is
removable.
6-5
Maintenance