9B-109 Lighting Systems:
License Lamp Bulb Replacement
Callout
Rear License Plate Lamp Assembly
1
Tip: Depress the very small lamp tabs inboard towards the outboard side of the vehicle in order to
release the lamps from the liftgate.
License Plate Lamp Socket
2
Tip: Twist the lamp socket electrical connector counter-clockwise and remove from the lens. Replace
the bulbs as needed.
Tail Lamp Replacement
Callout
Preliminary Procedure
Open the liftgate in order to access the tail lamp access hole covers and screws.
1
Tail Lamp Access Hole Cover Assembly (Qty: 2)
Tail Lamp Screws (Qty: 2)
CAUTION
!
2
Refer to "Fastener Notice: ".
Tightening torque
Tighten the screws in the sequence shown to 2.5 N⋅m (22 lb in)
Component Name
Component Name