Mazda RX-8 Manual page 858

Diagnostic procedure
STEP INSPECTION
VERIFY FREEZE FRAME DATA HAS
BEEN RECORDED
1
Has FREEZE FRAME DATA been
•
recorded?
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
Verify related Service Bulletins and/or
•
2
on-line repair information availability.
Is any related repair information
•
available?
INSPECT APP SENSOR CONNECTOR FOR
POOR CONNECTION
Turn the ignition switch off.
•
3
Disconnect the APP sensor connector.
•
Inspect for poor connection (such as
•
damaged/pulled-out pins, corrosion).
Is there any malfunction?
•
INSPECT APP SENSOR
Inspect the APP sensor.
•
(See ACCELERATOR PEDAL
4
POSITION (APP) SENSOR
INSPECTION .)
Is there any malfunction ?
•
INSPECT PCM CONNECTOR FOR POOR
CONNECTION
Turn the ignition switch off.
•
5
Disconnect the PCM connector.
•
Inspect for poor connection (such as
•
damaged/pulled-out pins, corrosion).
Is there any malfunction?
•
ACTION
Yes Go to the next step.
Record the FREEZE FRAME DATA on the
No
repair order, then go to the next step.
Perform repair or diagnosis according to the
available repair information.
Yes
If the vehicle is not repaired, go to the next
•
step.
No Go to the next step.
Yes Repair or replace the terminal, then go to Step 6.
No Go to the next step.
Replace the APP sensor, then go to Step 6.
Yes
(See ACCELERATOR PEDAL
REMOVAL/INSTALLATION .)
No Go to the next step.
Repair or replace the terminal, then go to the next
Yes
step.
No Go to the next step.
(w) Engine Diagnostics & Control
Page 295