Table of Contents
Advertisement
3.8 Replacing the subframe connector extruded section
11. Weld the rear bracket (A) to the subframe connector
extruded element and to the two extruded elements
fitted previously.
12. Refit the front/rear lateral trellises (see
chapter 3.10)
13. Refit the lateral crash reinforcement (see
chapter 3.4)
14. Refit the complete vehicle flank (see chapter 3.3)
15. Refit the rear spoiler (see chapter 4.1)
16. Refit the roof skin (see chapter 3.1)
17. Refit the rear end module (see F458 Italia workshop
manual)
Copyright ©
2010
A
11
11
Advertisement
Table of Contents
